Dillon AP Mechanical Dynamometer 5” Dial 1000 kg x 10kg 30006-0159
The Dillon AP 30006-0159 provides 1,000 kg capacity with 10 kg resolution, making it a dependable choice for metric rigging, lifting, and line tension. Ruggedly built, it operates flawlessly in extreme climates and hazardous work sites without reliance on electronics.
MSRP:
$1,745.00
Get Today’s Best Price by Requesting a Custom Quote
Real-Time Tracking
Receive tracking information immediately once your order ships.
Dillon Shackles Included
Delivered with nickel-plated Dillon shackles for lasting durability.
NIST-Traceable Calibration
Certified accuracy through NIST-traceable calibration processes.
Downloads & Resources
Construction & Durability
Built to Survive What Your Job Demands
Alloy‑Steel Flexing Beam
Machined from high‑grade E4340 alloy steel and heat‑treated, the flexing beam offers exceptional strength and a generous safety margin.
Anti‑Parallax Dial
The mar‑ and fog‑resistant 5‑inch dial is engineered to eliminate parallax, so readings are accurate from any viewing angle.
Application & Use Cases
Primary Applications for Dillon AP Dynamometer
The Dillon Dynamometer has proven its value across these diverse jobs, providing reliable precision force or tension measurement in demanding environments.
Construction & Industrial
- Light rigging
- Cable installations
- Overhead safety device verification.
Utility & Safety
- Testing safety lines and fall protection harnesses
- Tensioning guy wires and verifying rescue equipment.
Aviation
- Adjusting aircraft control cable tension
- Testing hangar equipment.
Marine
- Tensioning dock lines, and moorings testing
- sailing rigging tensioning
- Verifying small crane loads.
Features & Benefits
Features That Make the Difference
Maximum Pointer Memory
A drag pointer holds the peak tension after load removal so you can record the highest force without watching the dial continuously. This is especially useful during dynamic tests or when the operator cannot monitor the dial in real time.
Generous Shackle Openings
Fit easily to most rigging hardware and resist corrosion thanks to electroless nickel plating. The large openings speed up connections to hooks, chains or slings, saving setup time on site.
Zero Control Adjustment
A zero knob on the rear of the case cancels up to 20 % of capacity (200 kg for this model) to offset the weight of slings or rigging. By cancelling out the rigging weight, the reading reflects only the applied load for greater accuracy.
Wide Temperature Range
Reliably operates from −50 °F to 140 °F; temperature compensation maintains accuracy in both cold and heat. This ensures dependable performance across diverse climates, from freezing environments to hot, tropical conditions.
What’s Included
Each component is purpose-built to deliver maximum safety, dependable accuracy, and straightforward operation from the moment you open the case.
- AP Mechanical Dynamometer 30006‑0159 – Ready to use with current calibration certificate.
- Shackles and Pins – Electroless nickel‑plated for corrosion resistance.
- Maximum Pointer & Zero Control – Factory‑installed features for peak reading and tare.
- Rugged Storage Case – High‑strength polymer case protects the instrument during transport.
- User Guide & Calibration Sticker – Operating instructions and a sticker showing calibration date and due date.
Optional Accessories Available
Enhance the versatility and convenience of your Dillon AP 30006-0159 with these available add-ons:
- Expedited Calibration Service
- Custom Shackle Configurations
Frequently Asked Questions
Technical Specifications for the
| Specification | Value |
|---|---|
| Model Number | Dynamometer 30006-0159 |
| Capacity | 1,000 kgs |
| Resolution | 10 kgs divisions |
| Accuracy | ±0.5% of full scale capacity |
| Dial Size | 5 inches (125mm) |
| Operating Temperature | -50°F to 140°F (-45°C to 60°C) |
| Proof Load | 150% of rated capacity |
| Ultimate Safety factor | 5:1 ultimate |
| Zero Control Range | Up to 20% of capacity |
| Construction | E4340 alloy steel or 7075‑T651 aluminium |
| Dial Protection | Anti-parallax design with sealed face |
| Corrosion Protection | Powder-coated steel, stainless load element, weather-resistant finish. |
| Weight | 4 Kilograms |
| Shipping Dimensions | 14” * 7” * 6” |
| Shackles | Electroless nickel plated |
| Case Material | Aluminum alloy with protective finish |
| Calibration | NIST -traceable certificate included |
| Warranty | Standard manufacturer warranty(extended options available) |
| Compliance | ASME B30.26, CE approved |
Professional Repair Services for AP Mechanical Dynamometer
With over 25 years of specialized experience, Dynamic Measurement Systems provides professional repair services for all Dillon AP Mechanical Dynamometers. Our certified technicians maintain a large in-stock parts inventory and use precision calibration equipment to restore your instrument to original factory specifications—complete with fresh NIST-traceable certification.
Our Professional Repair Capabilities
- Certified Mechanical Expertise – Factory-trained technicians with extensive knowledge of AP Dynamometer systems and calibration procedures
- Complete Restoration Services – From minor adjustments to full rebuilds, we return your unit to original performance specifications
- NIST-Traceable Calibration – Every repaired unit is issued a fresh certificate using properly certified reference standards
- Emergency Service Available – Expedited repair processing for storm restoration crews and critical project timelines
- Comprehensive Documentation – Detailed reports with before/after readings and a record of all work performed for your files
Best Selling Products
-
Dillon AP Mechanical Dynamometer 10” Dial 10,000 lb x 50 lb 30007-0083
$2,275.00 Add to cart -
EDjunior Dynamometer 5T (10K) – with Green Pin Shackles
$2,425.00 Add to cart -
Dillon EDX EDxtreme Electronic Dynamometer 2T (5K)
Price range: $3,330.00 through $4,430.00 Select options This product has multiple variants. The options may be chosen on the product page -
Dillon AP Mechanical Dynamometer 10” Dial 1,000 lb x 5 lb 30007-0026
$2,030.00 Add to cart -
Dillon X-ST Tension Calibration Force Gauge
Price range: $1,655.00 through $2,180.00 Select options This product has multiple variants. The options may be chosen on the product page -
Dillon AP Mechanical Dynamometer 10” Dial 20,000 kg x 100 kg 30784-0058
$8,990.00 Add to cart
Calibration that protects your readings
Some calibrations may look official, but they don’t stand up under audit. If 1% reference gear is used to “calibrate” an instrument requiring ±0.5% or 0.1% accuracy, you’re not receiving calibration—you’re inheriting risk.
Calibration for Your Dillon AP Dynamometer
- NIST-Traceable Standards – Clearly documented on your certificate
- Ultra-Precise Reference Equipment – At least 10x tighter (0.01% accuracy) than your AP spec
- Multi-Point Verification – Full-range testing with both increasing and decreasing loads
- Transparent Results – Actual before/after readings with uncertainties, never vague checkboxes
- Calibration Labeling – Sticker with current date and next due date for easy compliance tracking
- Expedited Service – Rush calibration available when downtime isn’t an option
- Custom Configurations – Specialized setups including arm-length rigs for pipe torquing and other unique requirements
Did You Know?
- Many calibration certificates omit before/after readings—without them, there’s no traceability trail if an audit or incident occurs.
- Using standards not tighter than your instrument inflates error and can push you out of tolerance in real-world conditions.
Learn exactly how we calibrate, fixtures used, verification points, typical turnaround times, and what’s included on your certificate.
Comparison with Other Models
Comparison With Similar Dillon AP Models
Model Capacity Increment Dial Size Best Applications 3006-0043 4,000 lb 25 lb 5” Medium-to-heavy duty work requiring higher capacity 3006-0027 1000 lbs 10 lbs 5" Light-duty applications where precision is critical. 3006-0019 5,00 lbs 10 lbs 5” Ultra-light applications where fine measurement is critical 3006-0084 10,000 lbs 100 lbs 5” Extreme heavy-duty work All models share the same anti‑parallax dial, mechanical reliability and NIST‑traceable calibration. As capacity increases, resolution steps up accordingly to maintain readability.
AP Mechanical Dynamometer vs. Electronic Models - Complete Comparison
Understanding the differences between mechanical and electronic dynamometers helps you choose the right tool for your specific applications. Here's how the Dillon AP Mechanical Dynamometer 30006-0159 compares to electronic alternatives:
Feature AP Mechanical 30006-0159 Dillon EDjunior Dillon EDXtreme Competitor Electronic Models Accuracy ±0.5% of capacity ±0.2% of capacity ±0.1% of capacity ±0.1% to ±0.5% of capacity Power Source None Required Rechargeable battery Rechargeable battery Battery Dependency Operating Life Unlimited 8–12 hours continuous 8–12 hours continuous Limited by Battery Temperature range -50°F to 140°F -4°F to 140°F -4°F to 140°F Typically -10°F to 120°F Display Type 5” analog dial Digital LCD Digital LCD with backlight Digital LCD Reading Method Analog needle Exact numerical Exact numerical Exact numerical Maximum Pointer Mechanical peak hold Digital peak hold Digital peak hold Digital peak hold Data Logging None None Yes, 1000+ reading Varies by model Wireless Connectivity None None Optional Bluetooth Some models Explosion-proof Yes (no electronics) No No No Shock Resistance Excellent Good Good Fail to Good Moisture Resistance Excellent Good (IP rating) Good (IP rating) Varies Calibration Complexity Mechanical Adjustment Electronic Calibration Electronic Calibration Electronic Calibration Field Serviceability Fully Serviceable Limited Limited Limited Warm-up Time Instant 30 Sec 30 Sec 30+ Sec Units of Measure Pounds Only lbf, kgf, newtons lbf, kgf, newtons multiple units Price Points Lower initial Cost Higher Higher Varies Long-term Cost Lowest Battery Replacement Battery Replacement Battery/ Electronic Proven Track Record Since 1937 Since 1990s Since 2000s Varies When to Choose AP Mechanical Dynamometer & When to Choose Electronic Models
When to Choose AP Mechanical Dynamometer When to Choose Electronic Models Ideal Applications for the 30006-0159: Consider EDJR/EDXtreme for: - Field operations in harsh environments where electronics can fail (temperature extremes, moisture, vibration).
- Jobs where battery maintenance and electronic down-time are unacceptable.
- Hazardous or high-voltage areas where spark-free operation is essential.
- Users who prefer a simple, rugged tool with minimal operating costs.
View Our Ap Dynamometers- Higher accuracy needs(±0.1% to ±0.2%)
- Data logging and multiple unit conversions
- Multiple unit conversions (lbf, kgf, Newtons)
- Integration with digital systems
- Precise numerical readings without interpretation
- Applications in controlled environments
View Our Digital Dynamometers
Cost of Ownership Analysis
Factor AP Mechanical 30006-0084 Electronic Models Initial Investment Lower upfront cost Higher initial investment Operating Costs Minimal - annual calibration only Calibration + Battery Mgmt Downtime Risk Virtually none due to power issues Battery management and charging requirements Service Life 15-20+ years with proper maintenance 8-12 years typical before obsolescence
Ready to Experience the Reliability Difference?
Join the thousands of utility professionals who trust Dynamic Measurement Systems for their most critical force measurement needs. The Dillon AP Dynamometers are in stock and ready to ship today with fresh NIST-traceable calibration.
Availability
- All dynamometers typically ship same day from Houston facility
- Custom modifications require consultation with technical team
Technical Support
- Expert guidance available
- Application-specific recommendations provided
Order Now: +1-281-405-0606
Email: info@dynameasure.com
Emergency Service Available - Storm restoration and urgent project support with expedited processing and shipping.
Questions? Our technical experts are standing by to help you select the right equipment for your specific applications. No sales pressure, just professional guidance from people who understand your world.