Dillon AP Mechanical Dynamometer 5” Dial 500 lb x 10 lb 30006-0019
Compact and precise, the Dillon AP 30006-0019 is trusted for lighter-load tension measurement where safety and accuracy matter. With a 500 lb capacity, ±0.5% accuracy, and a 5-inch anti-parallax dial, it provides dependable performance from -50°F to 140°F—without batteries or electronics to fail.
No batteries. No software. Just rugged reliability that’s stood the test of time.
MSRP:
$1,745.00
Get Today’s Best Price by Requesting a Custom Quote
Same-Day Dispatch
Eligible in-stock items shipped the same day. T&C apply.
Dillon Shackles Included
Ships complete with Dillon shackles, built for strength and longevity.
NIST-Traceable Calibration
NIST-traceable calibration guarantees dependable measurement precision.
Downloads & Resources
Construction & Durability
Built to Survive What Your Job Demands
Steel Flexing Beam Core
Made from heat-treated E4340 alloy steel, the flexing beam delivers exceptional strength and resists deformation under repeated loading.
Anti-Parallax Dial
The sealed 5-inch dial eliminates reading errors caused by viewing angle, giving you precise results from any position.
Application & Use Cases
Primary Applications for Dillon AP Dynamometer
The Dillon Dynamometer has proven its value across these diverse jobs, providing reliable precision force or tension measurement in demanding environments.
Construction & Industrial
- Light rigging and load testing
- Overhead safety device verification
Utility & Safety
- Safety line testing
- Light-duty guy wire tensioning
Aviation
- Small aircraft control cable tensioning
- Light hangar equipment verification
Marine & Offshore
- Dock line and mooring testing
- Small crane or hoist load checks
Features & Benefits
Features That Make the Difference
Maximum Pointer Memory
Captures and locks in the highest tension reached during a test, allowing you to review results without having to watch the dial continuously. The pointer resets easily, making it ready for the next measurement in seconds.
Generous Shackle Openings
Heavy-duty, nickel-plated shackles accommodate a variety of rigging hardware sizes. This flexibility makes setup quick and compatible with diverse applications.
Zero Control Function
Allows precise adjustment of up to 20% of capacity (100 lbs for this model) to offset rigging or hardware weight. This ensures that your measurement reflects only the applied load for accurate results.
Wide Temperature Range
Designed to maintain accuracy from -50°F to 140°F, it performs reliably in both extreme cold and intense heat. Temperature compensation ensures consistent readings in any climate.
What’s Included
Every Dillon AP 30006-0019 is delivered as a complete, ready-to-use package, no extra purchases required to get started.
- Dillon AP 30006-0019 Dynamometer – The fully mechanical, 500 lb capacity unit, freshly calibrated and ready for service.
- Heavy-Duty Nickel-Plated Shackles – Corrosion-resistant shackles sized for this model’s capacity, compatible with a wide range of rigging hardware.
- NIST-Traceable Calibration Certificate – Official documentation confirming accuracy, issued after your order for maximum validity.
- Rugged ABS Carry Case – Custom foam inserts protect the instrument during transport and storage, even in harsh environments.
- User’s Guide – Clear, step-by-step instructions for setup, safe use, and maintenance.
Calibration Sticker – Displays certification date and next calibration due date for easy compliance tracking.
Optional Accessories Available
Enhance the versatility and convenience of your Dillon AP 30006-0019 with these available add-ons:
- Expedited Calibration Service
- Custom Shackle Configurations
Frequently Asked Questions
Technical Specifications for the
| Specification | Value |
|---|---|
| Model Number | Dynamometer 30006-0019 |
| Capacity | 500 lbs |
| Resolution | 10 lbs divisions |
| Accuracy | ±0.5% of full scale capacity |
| Dial Size | 5 inches (125mm) |
| Operating Temperature | -50°F to 140°F (-45°C to 60°C) |
| Proof Load | 150% of rated capacity |
| Ultimate Safety factor | 5:1 ultimate |
| Zero Control Range | Up to 20% of capacity |
| Construction | E4340 alloy steel flexing beam |
| Dial Protection | Anti-parallax design with sealed face |
| Corrosion Protection | Powder-coated steel, stainless load element, weather-resistant finish. |
| Weight | 9 Pounds |
| Shipping Dimensions | 16” * 11” * 7” |
| Shackles | Electroless nickel plated |
| Case Material | Aluminum alloy with protective finish |
| Calibration | NIST -traceable certificate included |
| Warranty | Standard manufacturer warranty(extended options available) |
| Compliance | ASME B30.26, CE approved |
Professional Repair Services for AP Mechanical Dynamometer
For more than 25 years, Dynamic Measurement Systems has specialized in repairing and restoring Dillon AP Mechanical Dynamometers. Our certified technicians keep a robust inventory of genuine parts and use precision calibration equipment to return your instrument to original factory specifications—backed by full NIST-traceable certification.
Our Professional Repair Capabilities
- Certified Mechanical Expertise – Factory-trained technicians with deep knowledge of AP Dynamometer systems and calibration processes
- Complete Restoration – From fine adjustments to full mechanical rebuilds, we restore your dynamometer to peak performance
- NIST-Traceable Calibration – Every repaired unit is certified using properly accredited reference standards
- Emergency Service – Expedited repairs for storm response crews and mission-critical project deadlines
- Detailed Documentation – Comprehensive reports with before/after readings and a full record of work performed for your maintenance files
Best Selling Products
-
Dillon AP Mechanical Dynamometer 10” Dial 10,000 lb x 50 lb 30007-0083
$2,275.00 Add to cart -
EDjunior Dynamometer 5T (10K) – with Green Pin Shackles
$2,425.00 Add to cart -
Dillon EDX EDxtreme Electronic Dynamometer 5T (10K)
Price range: $3,830.00 through $5,040.00 Select options This product has multiple variants. The options may be chosen on the product page -
Dillon AP Mechanical Dynamometer 10” Dial 5,000 lb x 20 lb 30007-0059
$2,120.00 Add to cart -
Dillon X-ST Tension Calibration Force Gauge with Maximum Hand
Price range: $1,815.00 through $5,175.00 Select options This product has multiple variants. The options may be chosen on the product page -
EDjunior Dynamometer 1T (2.5K) – with Green Pin Shackles
$2,090.00 Add to cart
Calibration that protects your readings
Some calibrations may look official, but they don’t stand up under audit or real-world use. If 1% reference equipment is used to “calibrate” an instrument designed for ±0.5% or 0.1% performance, that’s not calibration—it’s added risk.
Calibration for Your Dillon AP Dynamometer
- NIST-Traceable Standards – Documented directly on your certificate
- High-Precision Reference Equipment – At least 10x tighter (0.01% accuracy) than your AP spec
- Multi-Point Verification – Full-range testing with both increasing and decreasing loads
- Transparent Reporting – Actual before/after readings with uncertainties, never vague checkboxes
- Calibration Label – Sticker with current and next-due dates for easy compliance tracking
- Expedited Service – Available when turnaround speed is critical
- Custom Setups – Including arm-length rigs for pipe torquing and other unique applications
Did You Know?
- Many calibration certificates omit before/after readings—leaving no traceability trail if audits or incidents occur.
- Using standards not tighter than your instrument inflates error and can quickly push you out of tolerance in the field.
Get to know how we calibrate, fixtures used, verification points, typical turnaround times, and exactly what’s included on your certificate.
Comparison with Other Models
Comparable Dillon AP Models to 30006-0019
Model Capacity Increment Dial Size Best Applications 30006-0043 4,000 lb 25 lb 5” Medium-to-heavy duty work requiring higher capacity 3006-0027 1000 lbs 10 lbs 5" Light-duty applications where precision is critical. 3006-0019 5,00 lbs 10 lbs 5” Ultra-light applications where fine measurement is critical 3006-0084 10,000 lbs 100 lbs 5” Extreme heavy-duty work The 500 lb AP dynamometer shines in light-duty, precision, and training applications
AP Mechanical Dynamometer vs. Electronic Models - Complete Comparison
Knowing the strengths and limitations of both mechanical and electronic dynamometers is key to selecting the right instrument for your job. Below is how the Dillon AP Mechanical Dynamometer 30006-0019 stacks up against modern electronic options.
Feature AP Mechanical 30006-0019 Dillon EDjunior Dillon EDXtreme Competitor Electronic Models Accuracy ±0.5% of capacity ±0.2% of capacity ±0.1% of capacity ±0.1% to ±0.5% of capacity Power Source None Required Rechargeable battery Rechargeable battery Battery Dependency Operating Life Unlimited 8–12 hours continuous 8–12 hours continuous Limited by Battery Temperature range -50°F to 140°F -4°F to 140°F -4°F to 140°F Typically -10°F to 120°F Display Type 5” analog dial Digital LCD Digital LCD with backlight Digital LCD Reading Method Analog needle Exact numerical Exact numerical Exact numerical Maximum Pointer Mechanical peak hold Digital peak hold Digital peak hold Digital peak hold Data Logging None None Yes, 1000+ reading Varies by model Wireless Connectivity None None Optional Bluetooth Some models Explosion-proof Yes (no electronics) No No No Shock Resistance Excellent Good Good Fail to Good Moisture Resistance Excellent Good (IP rating) Good (IP rating) Varies Calibration Complexity Mechanical Adjustment Electronic Calibration Electronic Calibration Electronic Calibration Field Serviceability Fully Serviceable Limited Limited Limited Warm-up Time Instant 30 Sec 30 Sec 30+ Sec Units of Measure Pounds Only lbf, kgf, newtons lbf, kgf, newtons multiple units Price Points Lower initial Cost Higher Higher Varies Long-term Cost Lowest Battery Replacement Battery Replacement Battery/ Electronic Proven Track Record Since 1937 Since 1990s Since 2000s Varies When to Choose AP Mechanical Dynamometer & When to Choose Electronic Models
When to Choose AP Mechanical Dynamometer When to Choose Electronic Models Best Applications for the 30006-0019: Consider EDjunior/EDXtreme for: - Precision load verification up to 500 lbs
- Environments where electronics are prohibited
- Locations with no access to power
- Long-term storage without maintenance
View More AP Mechanical Dynamometers- Higher accuracy needs(±0.1% to ±0.2%)
- Data logging and multiple unit conversions
- Multiple unit conversions (lbf, kgf, Newtons)
- Integration with digital systems
- Precise numerical readings without interpretation
- Applications in controlled environments
View Electronic DynamometersCost of Ownership Analysis
Factor AP Mechanical 30006-0084 Electronic Models Initial Investment Lower upfront cost Higher initial investment Operating Costs Minimal - annual calibration only Calibration + Battery Mgmt Downtime Risk Virtually none due to power issues Battery management and charging requirements Service Life 15-20+ years with proper maintenance 8-12 years typical before obsolescence
Ready to Experience the Reliability Difference?
Join the thousands of utility professionals who trust Dynamic Measurement Systems for their most critical force measurement needs. The Dillon AP Dynamometers are in stock and ready to ship today with fresh NIST-traceable calibration.
Availability
- All dynamometers typically ship same day from Houston facility
- Custom modifications require consultation with technical team
Technical Support
- Expert guidance available
- Application-specific recommendations provided
Order Now: +1-281-405-0606
Email: info@dynameasure.com
Emergency Service Available - Storm restoration and urgent project support with expedited processing and shipping.
Questions? Our technical experts are standing by to help you select the right equipment for your specific applications. No sales pressure, just professional guidance from people who understand your world.